|
|
|
 |
  Printversion |
|
Hydrolab Series 5
Firmware Downloads
Upgrading MPL Main Firmware will revert the Sonde to Factory Defaults.
Upgrading MPL Driver Firmware will revert the Driver Settings to Factory Defaults.
Any custom settings will need to be re-entered after update is complete.
For questions, please contact Hach Hydromet Technical Support at 1-800-949-3766.
This is an restricted download page. If you want to download a file here, you will be asked to register.
Mpl Main Code- Driver for Hach LDO² Sensor (Cap lot numbers 0290-1060)
Driver for all second generation Hach LDO sensors and first generation sensors with second generation caps
Version 2.10
Release Date: 11/23/10
Note: Version 2.10 is to be used with second generation caps only. First generation caps are not structurally compatible with second generation sensor bodies.
Filename: LDO2.210, FileSize: 7 KB
Download - DRIVER FOR HACH LDO² SENSOR (Cap lot numbers 1067-1088)
Driver for all second generation Hach LDO sensors and first generation sensors with second generation caps
Version 2.20
Release Date: 3/24/11
Note: Version 2.20 is to be used with second generation caps only. First generation caps are not structurally compatible with second generation sensor bodies.
Filename: LDO2.220, FileSize: 7 KB
Download - DRIVER FOR HACH LDO² SENSOR (Cap lot numbers 1116-1144)
Driver for all second generation Hach LDO sensors and first generation sensors with second generation caps
Version 2.30
Release Date: 5/17/11
Note: Version 2.30 is to be used with second generation caps only. First generation caps are not structurally compatible with second generation sensor bodies.
Filename: LDO2.230, FileSize: 7 KB
Download - DRIVER FOR HACH LDO² SENSOR (CAP LOT NUMBERS 1167 to 1214)
Driver for all second generation Hach LDO sensors and first generation sensors with second generation caps
Version 2.40
Release Date: 7/25/11
Note: Version 2.40 is to be used with second generation caps only. First generation caps are not structurally compatible with second generation sensor bodies.
Filename: LDO2.240, FileSize: 7 KB
Download - DRIVER FOR HACH LDO² SENSOR (CAP LOT NUMBERS 1221 to 1263)
Driver for all second generation Hach LDO sensors and first generation sensors with second generation caps
Version 2.50
Release Date: 10/21/11
Note: Version 2.50 is to be used with second generation caps only. First generation caps are not structurally compatible with second generation sensor bodies.
Filename: LDO2.250, FileSize: 7 KB
Download - DRIVER FOR HACH LDO² SENSOR (CAP LOT NUMBERS 1354 and above)
Driver for all second generation Hach LDO sensors and first generation sensors with second generation caps
Version 2.60
Release Date: 02/02/12
Note: Version 2.60 is to be used with second generation caps only. First generation caps are not structurally compatible with second generation sensor bodies.
Filename: LDO2.260, FileSize: 7 KB
Download - Driver for Hach LDO Sensor (Cap lot numbers 0277 and below)
Driver for first generation Hach LDO Sensor combined with first generation caps
Version 1.73
Release Date: 10/15/07
Note: This is the only firmware to be used with first generation caps and sensor bodies
Filename: LDO.173, FileSize: 7 KB
Download - Series 5 MPL Main Code
Main Firmware Operating System for Hydrolab Series 5 Sondes
Version:5.4.3
Release Date: 11/26/07
Release Notes: Minor Maintenance Update over version 5.42 released on 08/02/07.
Filename: MPL.543, FileSize: 192 KB
Download - Self Cleaning Turbidity for MS5 or DS5
Driver for Self Cleaning Turbidity Sensor for MS5 or DS5
Version 2.12
Release Date 12/01/05
Filename: SCTurb.212, FileSize: 7 KB
Download - Self Cleaning Turbidity for DS5X
Driver for Self Cleaning Turbidity Sensor for DS5X
Verson 2.12
Release Date 12/01/05
Filename: SCXTurb.212, FileSize: 7 KB
Download - DS5X Motor Only (No Turbidity)
Driver for DS5X Motor Only (No Turbidity)
Version 2.11
Release Date 12/01/05
Filename: SCX.211, FileSize: 7 KB
Download
|
|
|